DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
117
To delete the mirroring ports:
DES-1228/ME:4#config mirror port 1 delete source port 2-4 both
Command: config mirror 1 delete source 2-4 both
Success.
enable mirror
Purpose Used to enable a previously entered port mirroring configuration.
Syntax
enable mirror
Description
This command, combined with the disable mirror command below, allows the user to
enter a port mirroring configuration into the Switch, and then turn the port mirroring on and
off without having to modify the port mirroring configuration.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To enable mirroring configurations:
DES-1228/ME:4#enable mirror
Command: enable mirror
Success.
disable mirror
Purpose Used to disable a previously entered port mirroring configuration.
Syntax
disable mirror
Description
This command, combined with the enable mirror command above, allows the user to
enter a port mirroring configuration into the Switch, and then turn the port mirroring on and
off without having to modify the port mirroring configuration.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To disable mirroring configurations:
DES-1228/ME:4#disable mirror
Command: disable mirror
Success.
To Next Page
Loading...
