36
ASYMMETRIC VLAN COMMANDS
The asymmetric VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
enable asymmetric_vlan
disable asymmetric_vlan
show asymmetric_vlan
Each command is listed, in detail, in the following sections.
enable asymmetric_vlan
Purpose Used to enable the asymmetric VLAN function on the Switch.
Syntax
enable asymmetric_vlan
Description This command enables the asymmetric VLAN function on the Switch
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To enable asymmetric VLANs:
DES-1228/ME:4#enable asymmetric_vlan
Command: enable asymmetric_vlan
Success.
disable asymmetric_vlan
Purpose Used to disable the asymmetric VLAN function on the Switch.
Syntax
disable asymmetric_vlan
Description This command disables the asymmetric VLAN function on the Switch
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To disable asymmetric VLANs:
To Next Page
Loading...
