D-Link DES-1228 - Page 250

DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
245
show asymmetric_vlan
Purpose Used to view the asymmetric VLAN state on the Switch.
Syntax
show asymmetric_vlan
Description This command displays the asymmetric VLAN state on the Switch
Parameters None.
Restrictions None.
Example usage:
To display the asymmetric VLAN state currently set on the Switch:
DES-1228/ME:4#show asymmetric_vlan
Command: show asymmetric_vlan
Asymmetric VLAN: Enabled
DES-1228/ME:4#