delete vlan
Purpose Used to delete a previously configured VLAN on the Switch.
Syntax
delete vlan <vlan_name 32>
Description This command will delete a previously configured VLAN on the Switch.
Parameters
<vlan_name 32> − The VLAN name of the VLAN to delete.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To remove the VLAN “v1”:
config vlan
Purpose Used to add additional ports to a previously configured VLAN.
Syntax
config vlan <vlan_name 32> {[ add [ tagged | untagged | forbidden ] |delete ]
<portlist> | advertisement [ enable | disable ]}(1)
Description This command allows the user to add ports to the port list of a previously configured VLAN.
The user can specify the additional ports as tagging, untagging, or forbidden. The default
is to assign the ports as untagging.
Parameters
<vlan_name 32> − The name of the VLAN to which to add ports.
add − Entering the add parameter will add ports to the VLAN. There are three types of
ports to add:
• tagged − Specifies the additional ports as tagged.
• untagged − Specifies the additional ports as untagged.
• forbidden − Specifies the additional ports as forbidden
delete − Deletes ports from the specified VLAN.
<portlist> − A port or range of ports to add to, or delete from the specified VLAN.
advertisement [enable | disable] − Enables or disables GVRP on the specified VLAN.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To add 4 through 8 as tagged ports to the VLAN v1:
To Next Page
Loading...
