DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
124
show vlan
Parameters
<vlanid> − Specifies a range of multiple VLAN IDs to be displayed.
<ports> − Specifies the ports to be displayed.
<vlan_name 32> − The VLAN name of the VLAN for which to display a summary of
settings.
<portlist> − Specifies a port or range of ports that will be displayed.
Restrictions None.
Example usage:
To display the Switch’s current VLAN settings:
DES-1228/ME:4#show vlan
Command: show vlan
VID : 1 VLAN Name : default
VLAN Type : Static Advertisement : Enabled
Member Ports : 1-28
Static Ports : 1-28
Current Tagged Ports :
Current Untagged Ports : 1-28
Static Tagged Ports :
Static Untagged Ports : 1-28
Forbidden Ports :
Total Entries : 1
To display the Switch’s current VLAN settings for a specific port:
DES-1228/ME:4#show vlan port 1
Command: show vlan ports 1
Port 1
VLAN ID Untagged Tagged Forbidden Dynamic
------- -------- ------ --------- -------
1 X - - -
show gvrp
Purpose Used to display the GVRP status for a port list on the Switch.
Syntax
show gvrp {<portlist>}
Description This command displays the GVRP status for a port list on the Switch.
Parameters
<portlist> − Specifies a port or range of ports for which the GVRP status is to be displayed.
Restrictions None.
Example usage:
To display GVRP port status:
To Next Page
Loading...
