D-Link DES-1228 - Page 135

DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
130
show lacp_port
Purpose Used to display current LACP port mode settings.
Syntax
show lacp_port {<portlist>}
Description This command will display the LACP mode settings as they are currently configured.
Parameters
<portlist> − Specifies a port or range of ports to be configured.
If no parameter is specified, the system will display the current LACP status for all ports.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To display LACP port mode settings:
DES-1228/ME:4#show lacp_port 1-10
Command: show lacp_port 1-10
Port Activity
------ --------
1 Active
2 Active
3 Active
4 Active
5 Active
6 Active
7 Active
8 Active
9 Active
10 Active
DES-1228/ME:4#