config dhcp_relay option_82 policy
Purpose Used to configure the reforwarding policy of relay agent information option 82 of the
switch.
Syntax
config dhcp_relay option_82 policy [replace | drop | keep]
Description This command is used to configure the reforwarding policy of DHCP relay agent
information option 82 of the switch.
Parameters
replace − The option 82 field will be replaced if the option 82 field already exists in the
packet received from the DHCP client.
drop − The packet will be dropped if the option 82 field already exists in the packet
received from the DHCP client.
keep − The option 82 field will be retained if the option 82 field already exists in the packet
received from the DHCP client.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To configure DHCP relay option 82 policy:
To Next Page
Loading...
