D-Link DES-1228 - Page 155

DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
150
DES-1228/ME:4#enable dhcp_relay
Command: enable dhcp_relay
Success.
DES-1228/ME:4#
disable dhcp_relay
Purpose Used to disable the DHCP/BOOTP relay function on the Switch.
Syntax
disable dhcp_relay
Description This command is used to disable the DHCP/BOOTP relay function on the Switch.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To disable DHCP relay:
DES-1228/ME:4#disable dhcp_relay
Command: disable dhcp_relay
Success.
DES-1228/ME:4#