D-Link DES-1228 - Page 169

DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
164
Example usage:
To delete a previously created 802.1X Guest VLAN.
DES-1228/ME:4#delete 802.1x guest_vlan Trinity
Command: delete 802.1x guest_vlan Trinity
Success.
DES-1228/ME:4#
show acct_client
Purpose Used to display the current RADIUS accounting client.
Syntax
show acct_client
Description
The show acct_client command is used to display the current RADIUS accounting client
currently configured on the Switch.
Parameters None.
Restrictions None.
Example usage:
To view the current RADIUS accounting client:
DES-1228/ME:4#show acct_client
Command: show acct_client
radiusAcctClient
---------------------------------------------------------------------------------
radiusAcctClientInvalidServerAddresses 0
radiusAcctClientIdentifier D-Link
radiusAuthServerEntry 0
---------------------------------------------------------------------------------
radiusAccServerIndex 1
radiusAccServerAddress 10.53.13.199
radiusAccClientServerPortNumber 0
radiusAccClientRoundTripTime 0
radiusAccClientRequests 0
radiusAccClientRetransmissions 0
radiusAccClientResponses 0
radiusAccClientMalformedResponses 0
radiusAccClientBadAuthenticators 0
radiusAccClientPendingRequests 0
radiusAccClientTimeouts 0
radiusAccClientUnknownTypes 0
radiusAccClientPacketsDropped 0
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
show auth_client
Purpose Used to display the current RADIUS authentication client.
Syntax
show auth_client