DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
180
DES-1228/ME:4#config cpu access_profile profile_id 3 add access_id 1 ip vlan default
source_ip 20.2.2.3 destination_ip 10.1.1.252 dscp 3 icmp type 11 code 32 port all deny
Command: config cpu access_profile profile_id 3 add access_id 1 ip vla
source_ip 20.2.2.3 destination_ip 10.1.1.252 dscp 3 icmp type 11 code 32 port all deny
Success.
delete cpu access_profile
Purpose Used to delete a previously created CPU access profile.
Syntax
delete cpu access_profile profile_id <value 1-3>
Description
The delete cpu access_profile command is used to delete a previously created CPU
access profile.
Parameters
profile_id <value 1-3> − Enter an integer between 1 and 3 that is used to identify the CPU
access profile to be deleted with this command. This value is assigned to the access
profile when it is created with the create cpu access_profile command.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To delete the CPU access profile with a profile ID of 1:
DES-1228/ME:4#delete cpu access_profile profile_id 1
Command: delete cpu access_profile profile_id 1
Success.
show cpu access_profile
Purpose Used to view the CPU access profile entry currently set in the Switch.
Syntax
show cpu access_profile profile_id <value 1-3>
Description
The show cpu access_profile command is used view the current CPU interface filtering
entries set on the Switch.
Parameters
profile_id <value 1-3> − Enter an integer between 1 and 3 that is used to identify the CPU
access profile to be deleted with this command. This value is assigned to the access
profile when it is created with the create cpu access_profile command.
Restrictions None.
Example usage:
To show the CPU filtering state on the Switch:
To Next Page
Loading...
