D-Link DES-1228 - Page 211

DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
206
config authen_login
user may choose one or a combination of up to four(4) of the following authentication
methods:
 tacacs – Adding this parameter will require the user to be authenticated using the
TACACS protocol from the remote TACACS server hosts of the TACACS server
group list.
 xtacacs – Adding this parameter will require the user to be authenticated using
the XTACACS protocol from the remote XTACACS server hosts of the XTACACS
server group list.
 tacacs+ – Adding this parameter will require the user to be authenticated using
the TACACS+ protocol from the remote TACACS+ server hosts of the TACACS+
server group list.
 radius − Adding this parameter will require the user to be authenticated using the
RADIUS protocol from the remote RADIUS server hosts of the RADIUS server
group list.
 server_group <string 15> − Adding this parameter will require the user to be
authenticated using a user-defined server group previously configured on the
Switch.
 local − Adding this parameter will require the user to be authenticated using the
local user account database on the Switch.
 none – Adding this parameter will require no authentication to access the Switch.
method_list_name – Enter a previously implemented method list name defined by the
user. The user may add one, or a combination of up to four (4) of the following
authentication methods to this method list:
 tacacs – Adding this parameter will require the user to be authenticated using the
TACACS protocol from a remote TACACS server.
 xtacacs – Adding this parameter will require the user to be authenticated using
the XTACACS protocol from a remote XTACACS server.
 tacacs+ – Adding this parameter will require the user to be authenticated using
the TACACS+ protocol from a remote TACACS+ server.
 radius − Adding this parameter will require the user to be authenticated using the
RADIUS protocol from a remote RADIUS server.
 server_group <string 15> − Adding this parameter will require the user to be
authenticated using a user-defined server group previously configured on the
Switch.
 local − Adding this parameter will require the user to be authenticated using the
local user account database on the Switch.
 none – Adding this parameter will require no authentication to access the Switch.
NOTE: Entering none or local as an authentication protocol will override any
other authentication that follows it on a method list or on the default method list.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To configure the user defined method list “Trinity” with authentication methods TACACS, XTACACS and local, in that
order.
DES-1228/ME:4#config authen_login method_list_name Trinity method tacacs xtacacs local
Command: config authen_login method_list_name Trinity method tacacs xtacacs local
Success.
DES-1228/ME:4#
Example usage: