config ssh algorithm
Purpose Used to configure the SSH algorithm.
Syntax
config ssh algorithm [3DES | AES128 | AES192 | AES256 | arcfour | blowfish |
cast128 | twofish128 | twofish192 | twofish256 | MD5 | SHA1 | RSA | DSA] [enable |
disable]
Description This command allows users to configure the desired type of SSH algorithm used for
authentication encryption.
Parameters
3DES – This parameter will enable or disable the Triple_Data Encryption Standard
encryption algorithm.
AES128 − This parameter will enable or disable the Advanced Encryption Standard
AES128 encryption algorithm.
AES192 − This parameter will enable or disable the Advanced Encryption Standard
AES192 encryption algorithm.
AES256 − This parameter will enable or disable the Advanced Encryption Standard
AES256 encryption algorithm.
arcfour − This parameter will enable or disable the Arcfour encryption algorithm.
blowfish − This parameter will enable or disable the Blowfish encryption algorithm.
cast128 − This parameter will enable or disable the Cast128 encryption algorithm.
twofish128 − This parameter will enable or disable the twofish128 encryption algorithm.
twofish192 − This parameter will enable or disable the twofish192 encryption algorithm.
MD5 − This parameter will enable or disable the MD5 Message Digest encryption
algorithm.
SHA1 − This parameter will enable or disable the Secure Hash Algorithm encryption.
RSA − This parameter will enable or disable the RSA encryption algorithm.
DSA − This parameter will enable or disable the Digital Signature Algorithm encryption.
[enable | disable] – This allows the user to enable or disable algorithms entered in this
command, on the Switch.
Restrictions Only Administrator-level users can issue this command.
Usage example:
To configure SSH algorithm:
DES-1228/ME:4# config ssh algorithm Blowfish enable
Command: config ssh algorithm Blowfish enable
Success.
To Next Page
Loading...
