DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
250
disable igmp_snooping multicast_vlan
Purpose Used to disable the multicast VLAN function.
Syntax
disable igmp_snooping multicast_vlan
Description This command controls the multicast VLAN function. The ISM VLAN will take effect when
igmp snooping multicast vlan is enabled. By default, the multicast VLAN is in a disabled
state.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To disable IGMP snoop multicast VLAN:
DES-1228/ME:4#disable igmp_snooping multicast_vlan
Command: disable igmp_snooping multicast_vlan
Success.
show igmp_snooping multicast_vlan
Purpose Used to show the information of multicast VLAN.
Syntax
show igmp_snooping multicast_vlan {<vlan_name 32>}
Description
The show igmp_snooping multicast_vlan command allows you to show the information
of multicast VLAN.
Parameters
<vlan_name 32> − The name of the multicast VLAN to be shown.
Restrictions None.
Example usage:
To display IGMP snoop multicast VLAN:
DES-1228/ME:4#show igmp_snooping multicast_vlan
Command: show igmp_snooping multicast_vlan
Muticast Vlan Global State : Enabled
VID : 123 VLAN Name: 123
Member Ports :
Tagged Member Ports :
Source Ports :
Status : Disabled
Replace Source IP : None
To Next Page
Loading...
Need help?
General