DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
277
DES-1228/ME:4#delete address_binding ip_mac all
Command: delete address_binding ip_mac all
Success.
enable address_binding trap_log
Purpose Used to enable the trap log for the IP-MAC binding function.
Syntax
enable address_binding trap_log
Description
This command, along with the disable address_binding trap_log will enable and disable
the sending of trap log messages for IP-MAC binding. When enabled, the Switch will send
a trap log message to the SNMP agent and the Switch log when an ARP packet is
received that doesn’t match the IP-MAC binding configuration set on the Switch.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To enable sending of IP-MAC Binding trap log messages on the Switch:
DES-1228/ME:4#enable address_binding trap_log
Command: enable address_binding trap_log
Success.
disable address_binding trap_log
Purpose Used to disable the trap log for the IP-MAC binding function.
Syntax
disable address_binding trap_log
Description
This command, along with the enable address_binding trap_log will enable and disable
the sending of trap log messages for IP-MAC binding. When enabled, the Switch will send
a trap log message to the SNMP agent and the Switch log when an ARP packet is
received that doesn’t match the IP-MAC binding configuration set on the Switch.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To disable sending of IP-MAC Binding trap log messages on the Switch:
DES-1228/ME:4#disable address_binding trap_log
Command: disable address_binding trap_log
Success.
To Next Page
Loading...
