D-Link DES-1228 - Page 296

DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
291
DES-1228/ME:4#show command logging
Command: show command logging
Command Logging State : Enabled
DES-1228/ME:4#
disable command logging
Purpose This command is used to disable command logging.
Syntax
disable command logging
Description This command is used to disable command logging.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage
To disable command logging:
DES-1228/ME:4#disable command logging
Command: disable command logging
Success.
DES-1228/ME:4#