DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
41
Example usage:
To create an SNMP group named “sg1:”
DES-1228/ME:4#create snmp group sg1 v3 noauth_nopriv read_view v1 write_view v1
Command: create snmp group sg1 v3 noauth_nopriv read_view v1 write_view v1 notify_view
delete snmp group
Purpose Used to remove an SNMP group from the Switch.
Syntax
delete snmp group <groupname 32>
Description
The delete snmp group command is used to remove an SNMP group from the Switch.
Parameters
<groupname 32> − An alphanumeric name of up to 32 characters that will identify the
SNMP group the new SNMP user will be associated with.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To delete the SNMP group named “sg1”.
DES-1228/ME:4#delete snmp group sg1
Command: delete snmp group sg1
Success.
show snmp groups
Purpose Used to display the group-names of SNMP groups currently configured on the Switch. The
security model, level, and status of each group are also displayed.
Syntax
show snmp groups
Description
The show snmp groups command displays the group-names of SNMP groups currently
configured on the Switch. The security model, level, and status of each group are also
displayed.
Parameters None.
Restrictions None.
To Next Page
Loading...
