D-Link DES-1228 - Page 72

DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
67
clear counters
Purpose Used to clear the Switch’s statistics counters.
Syntax
clear counters {ports <portlist>}
Description This command will clear the counters used by the Switch to compile statistics.
Parameters
<portlist> − Specifies a port or range of ports to be displayed.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To clear the counters:
DES-1228/ME:4#clear counters ports 2-9
Command: clear counters ports 2-9
Success.
DES-1228/ME:4#
clear log
Purpose Used to clear the Switch’s history log.
Syntax
clear log
Description This command will clear the Switch’s history log.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To clear the log information:
DES-1228/ME:4#clear log
Command: clear log
Success.
DES-1228/ME:4#
show log
Purpose Used to display the switch history log.
Syntax
show log {index <value_list X-Y>}
Description This command will display the contents of the Switch’s history log.
Parameters
index <value_list X-Y>
− This command will display the history log, beginning and ending
at the value specified by the user in the <value_list X-Y> field.
If no parameter is specified, all history log entries will be displayed.
Restrictions None.