DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
86
may use the Space bar, p and n keys to view information for the remaining ports.
Restrictions None.
Example usage:
To show STP ports information for port 1 (STP enabled on Switch):
DES-1228/ME:4#show stp ports
Command: show stp ports
MSTP Port Information
----------------------
Port Index : 1 , Hello Time: 2 /2 , Port STP Enabled , LBD : No
Restricted role : False, Restricted TCN : False
External PathCost : Auto/200000 , Edge Port : False/No , P2P : Auto /Yes
Port Forward BPDU : Enabled
MSTI Designated Bridge Internal PathCost Prio Status Role
----- ------------------ ----------------- ---- ---------- ----------
0 N/A 200000 128 Disabled Disabled
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show stp instance_id
Purpose Used to display the Switch’s STP instance configuration
Syntax
show stp instance_id <value 0-8>
Description This command displays the Switch’s current STP Instance Settings and the STP Instance
Operational Status.
Parameters
<value 0-8> − Enter a value defining the previously configured instance_id on the Switch.
An entry of 0 will display the STP configuration for the CIST internally set on the Switch.
Restrictions None
Example usage:
To display the STP instance configuration for instance 0 (the internal CIST) on the Switch:
To Next Page
Loading...
