DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
89
DES-1228/ME:4#create fdb default 00-00-00-00-01-02 port 5
Command: create fdb default 00-00-00-00-01-02 port 5
Success.
create multicast_fdb
Purpose Used to create a static entry to the multicast MAC address forwarding table (database)
Syntax
create multicast_fdb <vlan_name 32> <macaddr>
Description This command will make an entry into the Switch’s multicast MAC address forwarding
database.
Parameters
<vlan_name 32> − The name of the VLAN on which the MAC address resides.
<macaddr> − The MAC address that will be added to the forwarding table.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To create multicast MAC forwarding:
DES-1228/ME:4#create multicast_fdb default 01-00-00-00-00-01
Command: create multicast_fdb default 01-00-00-00-00-01
Success.
config multicast_fdb
Purpose Used to configure the Switch’s multicast MAC address forwarding database.
Syntax
config multi
cast_fdb <vlan_name
32> <macaddr> [add | de
lete] <portlis
t>
Description This command configures the multicast MAC address forwarding table.
Parameters
<vlan_name 32> − The name of the VLAN on which the MAC address resides.
<macaddr> − The MAC address that will be added to the multicast forwarding table.
[add | delete] − add will add ports to the forwarding table. delete will remove ports from the
multicast forwarding table.
<portlist> − Specifies a port or range of ports to be configured.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To add multicast MAC forwarding:
DES-1228/ME:4#config multicast_fdb default 01-00-00-00-00-01 add 1-5
Command: config multicast_fdb default 01-00-00-00-00-01 add 1-5
Success.
To Next Page
Loading...
