DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
MAC Notification Settings
MAC No
tification is used to monitor MAC addresses learned and
entered into the forwarding database. To globally set MAC notification
on the Switch, click Administration > MAC Notification Settings.
Global Settings
The following parameters may be viewed and modified:
Parameter Description
State
Enable or disable MAC notification globally on the
Switch
Interval
(sec)
The time in seconds between notifications.
History
Size
The maximum number of entries listed in the
history log used for notification. Up to 500 entries
can be specified.
Port Settings
To change MAC notification settings for a port or group of ports on the
Switch, configure the following parameters.
Parameter Description
From…To
Select a port or group of ports to enable for MAC
notification using the pull-down menus.
State
Enable MAC Notification for the ports selected
using the pull-down menu.
Click Apply to implement changes made.
Figure 6- 22. MAC Notification Settings window
51
To Next Page
Loading...
