xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
Initialize Port(s)
This window allows you to initialize ports for the 802.1X Settings. This window will appear in the folder when the
“enable 802.1x” command is entered into the command line interface.
To initialize ports, click Security > 802.1X > Initialize Port(s)
Figure 9- 25. Initialize Port(s) window
To initialize port(s), use the drop down menu to select the port(s) and click Apply.
Reauthenticate Port(s)
This window allows you to reauthenticate ports for the 802.1X Settings. This window will appear in the folder when
the “enable 802.1x” command is entered into the command line interface.
To reauthenticate ports, click Security > 802.1X > Reauthenticate Port(s)
Figure 9- 26. Reauthenticate Port(s) window
To reauthenticate port(s), use the drop down menu to select the port(s) and click Apply.
144
To Next Page
Loading...
