xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
40
Web Settings
Web-based management is Enabled by default. If you choose to disable this by selecting Disabled, you will lose the
ability to configure the system through the web interface as soon as these settings are applied.
To access this table, click Configuration > Web Settings:
Figure 6- 18. Web Settings window
Telnet Settings
Telnet configuration is Enabled by default. If you do not want to allow configuration of the system through Telnet
choose Disabled. The TCP ports are numbered between 1 and 65535. The "well-known" TCP port for the Telnet
protocol is 23.
To access this table, click Configuration > Telnet Settings:
Figure 6- 19. Telnet Settings window
Password Encryption
Password Encryption Status can be Enabled or Disabled in this window, it is Disabled by default.
To access this table, click Configuration > Password Encryption:
Figure 6- 20. Password Encryption window
Clipaging Settings
Clipaging Status can be Enabled or Disabled in this window, it is Enabled by default.
To access this table, click Configuration > Clipaging Settings:
Figure 6- 21. Clipaging Settings window
To Next Page
Loading...
