xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
43
Ping Test
Ping is a small program that sends ICMP Echo packets to the IP address you specify. The destination node then
responds to or "echoes" the packets sent from the Switch. This is very useful to verify connectivity between the Switch
and other nodes on the network.
To access this table, click Configuration > Ping Test:
Figure 6- 24. Ping Test window
The user may use Infinite times radio button, in the Repeat Pinging for field, which will tell the ping program to keep
sending ICMP Echo packets to the specified IP address until the program is stopped. The user may opt to choose a
specific number of times to ping the Target IP Address by entering a number between 1 and 255. Click Start to
initiate the Ping program
To Next Page
Loading...
Need help?
General