xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
Figure 11- 1 . Authenticator State window (for Port-based 802.1X) 9
This window displays the Authenticator State for individual ports on a selected device. A polling interval between 1s
and 60s seconds can be set using the drop-down menu at the top of the window and clicking OK.
The information on this window is described as follows:
Parameter Description
MAC Address
The MAC Address of the device of the corresponding index number.
Auth PAE State
The Authenticator PAE State value can be: Initialize, Disconnected, Connecting, Authenticating,
Authenticated, Aborting, Held, Force_Auth, Force_Unauth, or N/A. N/A (Not Available) indicates
that the port's authenticator capability is disabled.
Backend State
The Backend Authentication State can be Request, Response, Success, Fail, Timeout, Idle,
Initialize, or N/A. N/A (Not Available) indicates that the port's authenticator capability is disabled.
Port Status
Controlled Port Status can be Authorized, Unauthorized, or N/A.
Authenticator Statistics
This window contains the statistics objects for the Authenticator PAE associated with each port. An entry appears in
this table for each port that supports the Authenticator function.
To view the Authenticator Statistics, click Monitoring > Port Access Control > Authenticator Statistics:
224
To Next Page
Loading...
