xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
To view the settings of a previously correctly configured rule, click the corresponding Show Details button on the CPU
Access Rule List window to view the following window:
Figure 10- 42. CPU Access Rule Detail Information window for IP
To establish the rule for a previously created CPU Access Profile:
To configure the Access Rules for IP, open the CPU Access Profile List window and click Add/View Rules for an
IPv6 entry. This will open the following window.
Figure 10- 4 . CPU Access Rule List window for IPv6 3
To remove a previously created rule, click the corresponding Delete Rules button. To add a new Access Rule, click
the Add Rule button:
Figure 10- 44. Add Access Rule window for IPv6
200
To Next Page
Loading...
