xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
75
NOTE: After all IP interfaces are set for your configurations, VLANs on the
switch can be routed without any additional steps.
Figure 7- 8. 802.1Q VLAN window – Add/Edit VLAN Tab
To return to the 802.1Q VLAN window, click the VLAN List Tab at the top of the window. To change an existing
802.1Q VLAN entry, click the corresponding Edit button. A new window will appear to configure the port settings and
to assign a unique name and number to the new VLAN. See the table below for a description of the parameters in the
new menu.
NOTE: The Switch supports up to 4k static VLAN entries.
Figure 7- 9. 802.1Q VLAN window – Edit window
To Next Page
Loading...
