D-Link DGS-3620-28PC-SI - DNS Resolver Dynamic Name Server Table; DNS Resolver Static Host Name Settings

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
406
Figure 9-28 DNS Resolver Static Name Server Settings window
The fields that can be configured are described below:
Parameter Description
Server IP Address Enter a DNS Resolver name server. Tick the Primary check box to set the name
server as a primary name server.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specific entry.
DNS Resolver Dynamic Name Server Table
This window displays the current DNS Resolver name servers.
To view this window, click Network Application > DNS Resolver > DNS Resolver Dynamic Name Server Table
as shown below:
Figure 9-29 DNS Resolver Dynamic Name Server Table window
DNS Resolver Static Host Name Settings
The window is used to create the static host name entry of the switch.
To view this window, click Network Application > DNS Resolver > DNS Resolver Static Host Name Settings as
shown below:
Figure 9-30 DNS Resolver Static Host Name Settings window
The fields that can be configured are described below:
Parameter Description
Host Name
Enter the name of the host.
IP Address
Enter the IP address of the host.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specific entry.