D-Link DGS-3620-28PC-SI - Errors; Received (RX)

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
426
Figure 10-20 Ethernet OAM Statistics window
The fields that can be configured are described below:
Parameter Description
Port
Use the drop-down menu to select the unit ID and the port number to view.
Port List
Enter a list of ports. Tick the All Ports check box to select all ports.
Click the Clear button to clear all the information entered in the fields.
DULD Settings
This window is used to configure and display the unidirectional link detection on port.
To view this window, click OAM > DULD Settings as shown below: