D-Link DGS-3620-28PC-SI - Appendix C System Log Entries

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
468
Appendix C System Log Entries
The following table lists all possible entries and their corresponding meanings that will appear in the System Log of
this Switch.
Category Log Description Severity Note
MAC-based
Access Control
Event description: A host failed to pass the authentication
Log Message: MAC-based Access Control unauthenticated host (MAC:
<macaddr>, Port <[unitID:]portNum>, VID: <vid>)
Parameters description:
macaddr: MAC address
unitID: The unit ID.
portNum: The port number.
vid: VLAN ID on which the host exists
Critical
Event description: The authorized user number on a port has reached the
maximum user limit.
Log Message: Port < [unitID:]portNum> enters MAC-based Access Control
stop learning state.
Parameters description:
unitID: The unit ID.
portNum: The port number.
Warning
Event description: The authorized user number on a port is below the
maximum user limit in a time interval (interval is project dependent).
Log Message: Port <[unitID:]portNum> recovers from MAC-based Access
Control stop learning state.
Parameters description:
unitID: The unit ID.
portNum: The port number.
Warning
Event description: The authorized user number on the whole device has
reached the maximum user limit.
Log Message: MAC-based Access Control enters stop learning state.
Parameters description:
None
Warning
Event description: The authorized user number on the whole device is below
the maximum user limit in a time interval (interval is project dependent).
Log Message: MAC-based Access Control recovers from stop learning state.
Parameters description:
None
Warning
Event description: A host has passed the authentication.
Log Message: MAC-based Access Control host login successful (MAC:
<macaddr>, port: <[unitID]portNum>, VID: <vid>)
Parameters description:
macaddr: The MAC address.
unitID: The unit ID.
portNum: The port number.
vid: The VLAN ID on which the host exists.
Informational
Event description: A host has aged out.
Log Message: MAC-based Access Control host aged out (MAC: <macaddr>,
port: <[unitID]portNum>, VID: <vid>)
Parameters description:
macaddr: The MAC address
unitID: The unit ID.
portNum: The port number.
vid: The VLAN ID on which the host exists.
Informational
PTP
Event description: PTP port role changed
Log Message: PTP port <[unitID:]portNum> role changed to <ptp_role>.
Parameters description:
unitID: The unit ID.
portNum: The port number.
ptp_role: The PTP role of the port.
Informational
Event description: PTP clock synchronized
Log Message: The boundary clock synchronized to its master, the offset value
is <+|-><Offset> second(s).
Parameters description:
Offset: The value of the offset between the slave and master.
Informational
Only when the
synchronized more than
one second, this log
message will be send.
DHCPv6 Client
Event description: DHCPv6 client interface administrator state changed.
Informational