D-Link DGS-3620-28PC-SI - Appendix A Mitigating ARP Spoofing Attacks Using Packet Content ACL; How Address Resolution Protocol works

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
451
Download Firmware
The following window is used to download firmware for the Switch.
Download Firmware from TFTP
This window allows the user to download firmware from a TFTP Server to the Switch and updates the switch.
Figure 12-5 Download Firmware from TFTP window
The fields that can be configured are described below:
Parameter Description
Unit Use the drop-down menu to select a unit for receiving the firmware. Select All for all
units.
TFTP Server IP
Enter the TFTP server IP address used.
IPv4
Click the radio button to enter the TFTP server IP address used.
IPv6
Click the radio button to enter the TFTP server IPv6 address used.
Domain Name
Click the radio button to enter the domain name.
Source File
Enter the location and name of the Source File.
Destination File
Enter the location and name of the Destination File.
Boot Up
Tick the check box to set it as a boot up file.
Click Download to initiate the download.
Download Firmware from RCP
This window allows the user to download firmware from a RCP Server to the Switch and updates the switch.
Figure 12-6 Download Firmware from RCP window