D-Link DGS-3620-28PC-SI - Appendix B Password Recovery Procedure

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
457
Figure 12-15 Upload Configuration to RCP window
The fields that can be configured are described below:
Parameter Description
Unit
Use the drop-down menu to select a unit for uploading the configuration file.
RCP Server IP
Enter the RCP Server IP Address used.
User Name
Enter the appropriate Username used.
Source File
Enter the location and name of the Source File.
Destination File
Enter the location and name of the Destination File.
Filter Use the drop-down menu to Include, Exclude or Begin a filter like SNMP, VLAN or
STP. Select the appropriate Filter action and enter the service name in the space
provided.
Click Upload to initiate the upload.
Upload Configuration to HTTP
This window allows the user to upload the configuration file from the Switch to a computer.
Figure 12-16 Upload Configuration File to HTTP window
The fields that can be configured are described below:
Parameter Description
Unit
Use the drop-down menu to select a unit for uploading the configuration file.
Source File
Enter the location and name of the Source File.
Filter Use the drop-down menu to Include, Exclude or Begin a filter like SNMP, VLAN or
STP. Select the appropriate Filter action and enter the service name in the space
provided.
Click Upload to initiate the upload.