14D-Link DIR-608 User Manual
Section 2 - Installation
4. Turn on or plug your modem back in and wait approximately one minute before proceeding.
6. If you are conguring the DIR-608 from a PC with a wired Ethernet connection, plug one end of an Ethernet cable
into the port labeled 1 on the back of the router, and the other end into the Ethernet port on your computer.
If you are conguring the DIR-608 wirelessly from a PC, connect to the Wi-Fi network printed on the label attached
to the bottom your router.
7. If you are connecting to a broadband service that uses a dynamic connection (not PPPoE), you may be online already.
Try opening a web browser and connecting to a website. If the website does not load, proceed to Getting Started on
page 16.
5. Connect the supplied power adapter to the router and a power outlet, verify the power LED is on and wait approximately
one minute before proceeding.
Modem
DIR-608
Modem
DIR-608
Modem
DIR-608
To Next Page
Loading...
