D-Link DIR-608 - Ipv6 Routing

74D-Link DIR-608 User Manual
Section 3 - Conguration
IPv6 Routing
IPv6 Routing Conguration
IPv6 Routing
DIR-608
Advanced
Maintenance
Conguration
Destination
Prex Length
Next Hop
Interface
▼
Add Route Delete Selected
This page allows you to you to dene custom IPv6 routes to control how data trac is moved
around your network.
Configuration
Destination: This is the IPv6 address of the router used to reach the specied
destination.
Prefix Lenth: Enter the IPv6 address prex length of the packets that will take this
route.
Next Hop: Enter your next hop gateway to be taken if this route is used.
Interface: Select the interface that the IP packet must use to transit out of the
router when this route is used.
Click the Add Route to add your custom IPv6 route. It will be added to the IPv6 Static
Route Table.
IPv6 Static Route Table
Select Destination NextHop Interface
IPv6 Static Route Table
The section displays the current IPv6 Static Route Table.
To delete an IPv6 route, select it from the IPv6 Static Route table and click the Delete
Selected button.