D-Link DIR-608 - Page 77

73D-Link DIR-608 User Manual
Section 3 - Conguration
IPv6 Filter (continued)
Current Filter Table
Rule Protocol
Source
IPv6/Prex
SPort
Dest IPv6/
Prex
DPort
Icmp6
Type:
State Direction Action
deny ip6 eeee: any 50 disable Downstream
enable
Delete
deny ip6 ffff:: any enable Upstream
disable
Delete
Current Filter Table
The section displays the current IPv6 Filter Rules.
To enable or disable an IPv6 route lter, click its disable or enable button from the Action
column.
To delete an IPv6 route lter, select it form the table and click the Delete button.
Click the Apply Changes to add your IPv6 lter.
DPort: Enter the destination port range, if applicable.
Enable: Check this box to enable the rule.
Rule Conguration
Rule
Action:
Permit Deny
Protocol:
IPv6
▼
Icmp6
Type:
PING6
▼
Direction: Upstream
▼
Source
IPv6
Address:
Prex
Length:
Dest IPv6
Address:
Prex
Length:
SPort: - DPort: -
Enable:
☑
Apply Changes Reset Help