D-Link DIR-608 - Access Control List

61D-Link DIR-608 User Manual
Section 3 - Conguration
Access Control List
Current ACL Table
The section displays the current ACL Table.
ACL Settings
WAN Setting: Use the dropdown menu to select either WAN or IP Address.
IP Address: This option will only be seen if you have selected IP Address above.
Enter the IP address range.
Services Allowed: Select the type of Internet service from which packets can be allowed
into the network.
Click the Add button to save and add these settings to the Current ACL table.
WAN ACL Conguration
Access Control List
DIR-608
Advanced
Maintenance
ACL Settings
WAN Setting:
WAN
▼
Services Allowed:
☐ web
☐ ping
ACL Settings
WAN Setting:
IP Address
▼
IP Address: -
(0.0.0.0 represents any IP)
Services Allowed:
☐ web
☐ ping
Add Reset
Current ACL Table
Select
IP Address
/Interface
Service Port Action
1 WAN web 80
Delete
This page allows you to set up an Access Control List to restrict the types of data packets
that can enter the network from the Internet.