D-Link DIR-608 - Wireless Repeater

57D-Link DIR-608 User Manual
Section 3 - Conguration
Wireless Repeater
Wireless Repeater
Wireless Repeater
DIR-608
Wireless
Advanced
This page allows you to congure wireless repeater settings for the DIR-608.
Wireless Repeater Setup
Repeater Enabled: Check the box and click the Apply button in order to enable the
Wireless Repeater function. Repeater function is disabled by default.
SSID of AP: If repeater mode is enabled, the name of the host network that is
being repeated is displayed here.
Click the Site Survey button to enable the router to search for nearby
wireless networks. This will take about 5 seconds.
Refer to Wireless Repeater Setup on page 58 for instructions on how to enable the
Wireless Repeater Functionality.
Wireless Repeater Setup
☐
Repeater Enabled(DHCP
mode will be set to ‘none’
if the repeater is enabled)
SSID of AP
Site Survey
Apply