D-Link DIR-608 - Local Network Settings Configuration

24D-Link DIR-608 User Manual
Section 3 - Conguration
Local Network
Click Local Network on the navigation menu to change the local network settings of the
router, congure the DHCP settings, add a new DHCP reservations, and view the currenly
assigned DHCP reservations. When you have nished conguring the Local Network, click
the Apply Changes button.
IP Address: Enter the IP address of the router. The default IP address is 192.168.11.1.
If you change the IP address, once you click Apply Changes, you will
need to enter the new IP address in your browser to get back into
the conguration utility.
Subnet Mask: Enter the subnet mask. The default subnet mask is 255.255.255.0.
LAN Interface Setup
This section allows you to congure the IP address of the router.
LAN Interface Setup
IP Address:
192.168.11.1
Subnet Mask:
255.255.255.0
Apply Changes
LAN Interface Setup
Local Network
DIR-608
Setup
Wireless