D-Link DIR-608 - Page 29

25D-Link DIR-608 User Manual
Section 3 - Conguration
Local Network (continued)
DHCP Mode: Choose the DHCP Server option in the pulldown menu to enable the
DHCP server on your router. Choose None to disable this function.
IP Pool Range: Enter the starting and ending IP addresses for the DHCP server’s IP
assignment.
Note: If you statically (manually) assign IP addresses to your computers
or devices, make sure the IP addresses are outside of this range or you
may have an IP conict.
Max Lease Time: The maximum length of time for the IP address lease. Enter the Lease
time in minutes.
Domain Name: Enter the domain name.
DNS Server 1: Enter the IP address of the rst DNS Server.
DNS Server 2: Enter the IP address of the second DNS Server, if there is one.
DNS Server 3: Enter the IP address of the second DNS Server, if there is one.
DHCP Server Settings
DHCP Mode:
DHCP Server
▼
IP Pool Range: 192.168.11.2 - 192.168.11.254
Max Lease Time:
120 minutes
Domain Name:
domain.name
DNS Server 1:
192.168.11.1
DNS Server 2:
DNS Server 3:
Apply Changes Undo
DHCP Server Settings
This section allows you to congure the local network and DHCP settings of your device. The
DHCP service supplies IP settings to clients congured to automatically obtain IP settings
that are connected to the device through the Ethernet port.