D-Link DIR-608 - Page 30

26D-Link DIR-608 User Manual
Section 3 - Conguration
DHCP Static IP Table
The DHCP Static IP Table displays the IP reservations that have been created. To make
any changes, select a reservation in the table by clicking the circle next to it and click
Update. To delete a reservation, select a reservation and click Delete Selected.
DHCP Static IP Conguration
Select IP Address MAC Address
192.168.11.14 00:00:40:30:05:70
Local Network (continued)
When you have nished conguring the Local Network, click the Apply Changes button.
DHCP Static IP Configuration
If you want a computer or device to always have the same IP address assigned, you can create
a DHCP reservation. The router will assign the IP address only to that computer or device.
When you have nished conguring the new DHCP Reservation, click the Add button to
activate your reservation. It will then be displayed in the DHCP Static IP Table below.
IP Address: Enter the IP address you want to assign to the computer or device.
This IP Address must be outside the DHCP IP Address Range.
MAC Address: Enter the MAC address of the computer or device.
DHCP Static IP Conguration
IP Address:
0.0.0.0
Mac address:
000000000000
Delete Selected Add Update Reset