D-Link DIR-608 - Page 25

21D-Link DIR-608 User Manual
Section 3 - Conguration
Easy Setup - PPPoE
Enter the account username and password provided by your
ISP.
User Name:
Password:
Conrm Password:
Account Validate
Back Next
Easy Setup - PPPoE
Enter the account username and password provided by your ISP.
User Name: Enter your username.
Password: Enter your password.
Confirm Password: Enter your password again.
Account Validate: Test that your PPPoE username and password are correct.
Next: Proceed to the next step.
Back: Go back to the last step.
Easy Setup - Static IP
Enter the IP parameters provided by your ISP.
IP Address:
0.0.0.0
Subnet Mask:
0.0.0.0
Default Gateway:
0.0.0.0
Primary DNS:
0.0.0.0
Secondary DNS:
0.0.0.0 (Optional)
Back Next
Easy Setup - Static IP
Enter the account username and password provided by your ISP.
IP Address: Enter the IP address provided by your ISP.
Subnet Mask: Enter the subnet mask.
Default Gateway: Enter the default gateway.
Primary DNS: Enter the primary DNS address.
Secondary DNS: Enter the secondary DNS address.
Wizard (continued)
If you choose PPPoE, please congure the following elds and click Next.
If you choose Static IP, please congure the following elds and click Next.