D-Link DIR-608 - Page 32

28D-Link DIR-608 User Manual
Section 3 - Conguration
If you choose PPPoE, please congure the following elds:
User Name: Enter the username provided by your ISP.
Password: Enter the password provided by your ISP.
Service Name: Enter the ISP service name (optional).
Idle Time: Set the connection time out length. (Connect on Demand only)
MTU Size: Enter the maximum transmission unit (MTU) size.
Static IP Address: Enter the IP address of the router provided by your ISP.
Connection Type: Select either Continuous, Connect on Demand, or Manual.
Attain DNS
Automatically:
Select this option to obtain DNS server information automatically.
Set DNS Manually: Select this option to manually input your DNS server information.
Internet Setup (continued)
WAN Interface
WAN Access Type:
PPPoE
▼
User Name:
Password:
Service:
MTU:
1452
Static IP Address:
Connection Type: Continuous
▼
Attain DNS Automatically:
Set DNS Manually:
DNS Server 1: 0.0.0.0
DNS Server 2:
0.0.0.0
WAN Interface
WAN Access Type:
DS-Lite
▼
DS-Lite Mode:
DS-Lite DHCPv6 Manual
AFTR Name or Address:
If you choose DS-Lite, please congure the following elds:
DS-Lite Mode: Select either DS-Lite DHCPv6 or Manual.
If you choose Manual, please congure the AFTR Name or Address eld.
AFTR Name or
Address:
Enter the AFTR Name or Address.