D-Link DIR-615+ - Redirect

99D-Link DIR-615+ User Manual
Section 4 - Conguration
Redirect
The Redirect page allows to enable or disable notications for when Internet
connection has failed.
Common Setting
Enable Redirect: Toggle this switch to enable failure notications in the browser
window.
Reasons for Redirect
The below options will only appear if redirect is enabled.
Physical
Connection Error:
Toggle this switch to enable notication if connection failure is due
to physical error.
The Device is not
Congured:
Toggle this switch to enable notication if connection failure due to
device not congured.
No Connection: Toggle this switch to enable notication if connection failure to due
no connection detected.