D-Link DIR-615+ - Ipv6

66D-Link DIR-615+ User Manual
Section 4 - Conguration
IPv6
Local IPv6 Address
Mode of local
IPv6 address
assignment:
Select Static or Prex delegation as the means of acquiring a local
IPv6 address.
IP Address: If Static has been selected, specify the static IPv6 address of the router.
The default IPv6 address is fd01::1.
If you change the IP address, once you click Apply, you may need to
enter the new IP address in your browser to access the conguration
utility.
Prex: Specify the IPv6 prex of the router. The default prex is 64.
Gateway IP
Address:
For Access Point, Repeater, and Client modes only.
Specify the gateway IP address which is used by the router to connect
to the internet. (Optional)
Dynamic IPv6 Addresses
Mode of Dynamic
IPv6 address
assignment:
Select Disable, Stateful, or Stateless.
Start IPv6: If Stateful has been selected, specify the starting IP address in the
DHCP server pool.
End IPv6: If Stateful has been selected, specify the end IP address in the DHCP
server pool.
Lease Time: If Stateful or Stateless has been selected, specify the lease time in
minutes for dynamic IPv6 addresses.
Click Apply when you are done.