D-Link DIR-615+ - Igmp

100D-Link DIR-615+ User Manual
Section 4 - Conguration
IGMP
The IGMP/MLD page allows you to enable/disable Internet Group
Management Protocol (IGMP) and Multicast Listener Discovery (MLD). IGMP
is used to managed multicast trac for IPv4-based networks. MLD is used to
manage multicast trac in IPv6-based networks.
IGMP
Enable/Disable: Toggle this switch to enable/disable IGMP.
IGMP version Choose from drop down list which IGMP version to use.
Interface: Choose from drop down list which interface to apply to
Enable/Disable: Toggle this switch to set the address of outgoing IGMP packets equal
to 0.0.0.0
Click APPLY when nished.