D-Link DIR-615+ - MAC Filter

85D-Link DIR-615+ User Manual
Section 4 - Conguration
MAC Filter
On the Wi-Fi/MAC Filter page, you can dene a set of MAC addresses of devices
which will be allowed to access the WLAN, or dene a set of MAC addresses of
devices which will not be allowed to access the WLAN.
To add a rule, click on the add button.
Frequency Band: Choose which frequency band you want the rule to apply to.
SSID: Choose which SSID you want the rule to apply to.
MAC Address: Specify the MAC address of the device.
Hostname: Specify hostname of the device (optional).
Enable Rule Toggle this switch to enable or disable the rule.
To Enable or Disable MAC Filter for a specic SSID, click on the SSID name listed
below each Wi-Fi band.
Enable MAC Filter: Toggle this switch to enable MAC lter. When this option is acti-
vated, you can create rules for ltering by MAC addresses
MAC lter restrict
mode:
Choose either allow or deny to enable/disable connection only
for specied MAC addresses.