D-Link DIR-615+ - Static Route

94D-Link DIR-615+ User Manual
Section 4 - Conguration
Static Route
Once connected to the Internet, your router automatically builds routing
tables that determine where trac should be sent. Static routes can override
this process, allowing trac to be directed to a specic client or location.
Routing Conguration
Add: Click this button to add a new static route.
Delete: Click this button to delete the selected route(s).
Destination
network:
Indicates the IP address of the destination network.
Gateway: Indicates the gateway traversed by the static route.
Interface: Indicates the interface traversed by the static route.
Metric: Indicates the metric of the static route.
Accessibility: Indicates the current status of the route.
Add Route
Protocol: Choose the protocol used by the static route.
Interface: Choose the interface used by the static route.
Destination
network:
Specify the IP address of the destination.
Destination
netmask:
Specify the netmask used by the destination IP.