D-Link DIR-615+ - Firewall Settings

68D-Link DIR-615+ User Manual
Section 4 - Conguration
Functions
IP Filter
Firewall
Filters
Add: Click here to add a new lter to the rewall. For details, see IP Filter
Create/Edit on page 69.
Delete: If you have a selected one or more lters, click this button to delete
the selected lter(s).
No: Indicates the number of the lter.
Name: Indicates the name of the lter.
State: Indicates whether the is enabled or disabled.
Action: Indicates the action taken when the lter is triggered.
IP version: Indicate to which IP version the lter applies.
The IP Filters page manages LAN users' access to the Internet. It is possible
to permit access to the Internet for specied IP addresses within your LAN or
to restrict access for specied IP addresses. You can also dene lters for port
access.
The currently dened IP lters are displayed in the table. You may dene up to
16 IP ltering rules. If you wish to remove a rule, click the corresponding check
box to select it and then click Delete. If you wish to create a new rule, click the
Add button.