D-Link DIR-615+ - Network; Ipv4

63D-Link DIR-615+ User Manual
Section 4 - Conguration
Network
This section will allow you to change the local network settings of the router and to congure the DHCP settings. In the
Settings menu on the bar on the top of the page, click Network. Click IPv4 and IPv6 to congure their respective settings.
Local IP Address
IP Address: Specify the IP address of the router. The default IP address is
192.168.0.1.
If you change the IP address, once you click Apply you will need to
enter the new IP address in your browser to access the conguration
utility.
Mask: Specify the subnet mask of the router. The default subnet mask is
255.255.255.0.
Gateway IP
Address:
For Access Point, Repeater, and Client modes only.
Specify the gateway IP address which is used by the router to connect
to the internet. (Optional)
Hostname: Specify the device domain name and URL to access the management
utility. The default URL is http://dlinkrouter.local/
Dynamic IP Addresses
Mode of Dynamic
IP address
assignment:
Select Disable, DHCP server, or DHCP relay. The default setting is
DHCP server
.
IPv4