D-Link DIR-615+ - Wps

77D-Link DIR-615+ User Manual
Section 4 - Conguration
WPS
The Wi-Fi Protected Setup page allows you to create a wireless connection
between your router and a device automatically by simply pushing a button.
WPS Control
Enable/Disable: Click this button to toggle WPS. For security reasons, WPS is disabled
by default.
Establish
connection:
Click this button to launch the Establish Connection menu,
described below.
Information
WPS state: Shows whether it is congured or not.
Network name
(SSID):
Indicates the SSID to which the client is connected.
Network
authentication:
Indicates the type of authentication used on the network.
Encryption: Indicates the encryption used by the authentication method.
Password PSK: Indicates the password of the network.
Update: Click this button to refresh the page.
Reset to
Uncongured:
Click here to clear WPS conguration data.