D-Link DIR-615+ - TR-069 Client

92D-Link DIR-615+ User Manual
Section 4 - Conguration
TR-069 Client
On the TR-069 Client page, you can congure the router for communication
with a remote Auto Conguration Server (ACS). The TR-069 client is used for
remote monitoring and management of the device.
TR-069 Client
Interface: Select the interface over which the client should operate.
Enable TR-069
client:
Toggle this switch to enable or disable TR-069.
Auto Conguration Server Settings
URL address: Specify the URL of your ISP's ACS.
Username: Specify the username for your ISP's ACS.
Password: Specify the password for your ISP's ACS.
Inform Settings
Enable: Toggle this switch to enable active contact with your ISP's ACS.
Interval: Specify the interval in seconds for each inform packet.
Connection Request Settings
Username: Specify the username here.